february.26 , 2010 saw filter for gsm850 (rx) murata part number : SAFEA881MFL0F00 marking : laser printing package dimensions specification 1/4 (1) (3)(4) others unit : unbalance port : balance port : ground : mm a w 1.35 0.05 5-0.25 0.05 0.5max. 2-0.25 0.05 5-0.325 0.050 (0.075) 2-0.25 0.05 (0.05) (1) (2) (3) (5) (4) (0.17) dot marking( ? 0 .3 ) 1.05 0.05 2-0.25 0.05 (5) (4) (2) (3) (1) nominal center frequency(fc) 1) 0.1 to 800 mhz 50 db min. 50 db min. 56 db 2) 800 to 824 mhz 45 db min. 45 db min. 55 db 3) 824 to 849 mhz 35 db min. 38 db min. 55 db 4) 914 to 970 mhz 23 db min. 24 db min. 27 db 5) 970 to 2400 mhz 40 db min. 40 db min. 52 db 6) 2400 to 6000 mhz 35 db min. 35 db min. 42 db max. max. 0.2db item specification -30 to 85c 252c typ. 881.5mhz (869 to 894mhz) insertion loss absolute attenuation 1.9db max. 1.7db max. 1.5 db balance port matching impedance (nominal) 150 w //82nh 50 w 180+0.8deg. (869 to 894mhz) max. ripple deviation unbalance port matching impedance (nominal) 0.5db 0.5db max. amplitude balance (869 to 894mhz) phase balance 1805deg. 1805deg. 0.3 db vswr 1.7 max. 1.6 max. 1.4 (869 to 894mhz) 1.0db max. 0.6db max. (869 to 894mhz)
february.26 , 2010 saw filter for gsm850 (rx) murata part number : SAFEA881MFL0F00 frequency performance 2/4
february.26 , 2010 saw filter for gsm850 (rx) murata part number : SAFEA881MFL0F00 3/4 dimensions of carrier tape dimensions of reel SAFEA881MFL0F00r14 4000pcs/reel dimensions of tape unit: mm unit: mm 160 ... 1 9 0 80 ...1 2 0 4 0 0 ... 56 0 trailer tape components leader cavity unit : m m 2.0 0.5 9.0 0.5 13 .5max. ( ? 60) ?? 1 7 8 ) ? 13.0 0.5 a w direction of feed cover tape 4.0 0.1 2 . 0 0 0. 05 3 max. +0.1 ? 0.8 -0.0 1.3 0.1 0.30 0. 05 1.6 0.1 3 max. 0.70 0.10 8.0 0.2 3.50 0.0 5 1.75 0.10 4.0 0.1 +0.1 ? 1.5 -0.0 a w a w
february.26 , 2010 saw filter for gsm850 (rx) murata part number : SAFEA881MFL0F00 4/4 recommended land pattern test circuit ? this pdf datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, its specifications are subject to change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers before ordering. ? this pdf datasheet has only typical specifications because there is no space for detailed specifications. therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. : land pattern unit : mm 0.25 1.3 0.25 0.325 0.425 0.425 0.325 0.525 0.25 1.6 0.25 0.325 0.525 82nh 1 150 w 5 4 2 3 50 w
|